1. Fill your Hot Tub with the pre filter (Provided w/LX Series) Run the filter outside the tub for the 1st 30 seconds to clear any sediment in the filter.
|

|
2. Balance PH with and Test Strips Test PH. The PH is usually high in our area. Start with about , (1/2 for 7’ tub -3/4 cup for 8’ ) Spa Down. TURN JETS ON HIGH. Wait 30 Minutes and retest and Repeat.
|

|
3. After PH is Balanced & the spa is heated to about 90
Add 2 capfuls of the Enzyme Powder to the filter area
w/jets on high.
|

|
4. Next add the Sustain/Monthly to the filter area every 30-45 days. This is a solution of natural enzymes that will stabilize the ph and soften the water.
|

|
5. Add 1 packet of ONEshock to the tub as a sanitizer at
Start up. Add 1-3 packets each time you exit the tub depending
on bather load & tub size. Add at least 1 packet/ week.
|

|
Whitehouse Direct - 651-424-3479
Other Helpful Videos
Hot Tub Placement for Cover lifter
Click Here To View Video
Gulf Coast Spas Hot Tub Electrical 101 Video
Click Here To View Video
|